Airthings X Lindab
Airthings and Lindab have collaborated to create a solution that enables retrofitting smart Variable Air Volume (VAV) dampers, which automatically regulate air circulation in rooms or zones within a building. Airthings’ wireless IoT sensors communicate directly with Lindab's UltraLink dampers over Bluetooth. The sensors measure temperature, humidity, and CO₂, sending the data to the Lindab dampers, which adjust air volumes automatically.
Simultaneously, the Airthings sensors send the data to the Airthings Cloud solution, enabling remote monitoring and analytics to further optimize indoor air quality (IAQ) and building performance.
Supported Airthings devices
Currently, three Airthings for Business devices support the Lindab Ultra BT solution:
Space Pro
Space CO₂
Space CO₂ Mini
Activating the connection between Airthings and Lindab
Set Up an Airthings Account
If you don’t already have an Airthings account, refer to the Getting Started Guide to set up your Airthings Dashboard account and install the devices.
Enable the Lindab Connection
After your Airthings account is set up and devices are installed:
Log in to the Airthings Dashboard.
Click on the Building where the devices are installed.
Navigate to Settings.
Scroll down and toggle on the Lindab connection.
Locate the QR code and MAC address of yourAirthings device
To link the Airthings device with the Lindab VAV damper, you will need a QR code and the MAC address of the Airthings device. These can be easily found in the Airthings Dashboard by following these steps:
Navigate to the Space where your device is registered.
Click on the three dots in the top-right corner of the device are.
Choose Settings.
You will be directed to the Settings page.
At the top, switch to the Overview tab.
Here you will find the Lindab QR code and the MAC address for the device.
Link Devices in the Lindab One Link App
Use the Lindab One Link app to link Airthings devices to Lindab VAV dampers.