How sensor data is transmitted to the cloud
A device transmits its data to the Hub, which then forwards the data to the cloud. If sensor data is missing from the dashboard, it could indicate an issue with either the device-to-Hub connection or the Hub-to-cloud connection.
To resolve this, start by ensuring that the Hub is functioning correctly. For detailed troubleshooting steps on verifying the Hub's operation, please read the article Business Devices: the Space Hub is offline
Once you have confirmed that the Hub is working properly, proceed with the following steps.
Troubleshooting Guide
Verify the device
Check the serial number displayed on the dashboard and compare it with the serial number on your device. Ensure they match to confirm you are working with the correct device.
Device Type Troubleshooting Guide
This guide helps you determine if your Airthings sensor device is functioning correctly by testing its basic response to user interaction. Follow the steps based on your device type:
1. Space Plus
Action: Wave your hand in front of the device.
Expected Response: The glowing ring on the device should light up (note that the color may vary).
2. Space Pro/CO2
Action: Wave your hand in front of the device.
Expected Response: The screen on the device should change.
3. Space CO2 Mini/Space Nano
Action: Press the Airthings logo on the device.
Expected Response: The glowing light on the device should light up (note that the color may vary).
No Reaction?
Solution: Replace the device's batteries with new ones and test the device again. We recommend using new 1.5V lithium batteries
Exception!
For the Space Nano, do not remove the batteries. For detailed instructions on troubleshooting the Space Nano, please refer to the article Space Nano: Onboarding and Connection.
Reaction:
If the device responds as expected, it indicates that it is functioning properly.
Check and Improve Connection with the Space Hub
Check the Connection Strength:
Action: Open the dashboard and find the connection strength indicator, which shows the signal strength between your device and the Hub in dBm.
For an overview of all your devices' connection strengths, navigate to the Status page under your building.
Evaluate:
Good Connection: A reading between 0 and -85 dBm indicates that your device is within the optimal range.
Weak Connection: A reading below -85 dBm suggests a weak connection, which could lead to data gaps.
Improve the Connection:
Move the Device: Position your device closer to the Hub to enhance signal strength.
Reset the Device: Remove the batteries from the device, then reinsert them.
Reconnect: Allow a few minutes for the device to reconnect with the Hub.
Exception!
For the Space Nano, do not remove the batteries. For detailed instructions on troubleshooting the Space Nano, please refer to the article Space Nano: Onboarding and Connection.
Need Further Assistance?
If the issue persists after trying these steps, please reach out to our Business Support team for additional help.