The reset button
The reset button is located at the back of the Space Pro monitor, above the battery compartment. It serves multiple purposes and can be pressed using a pin or any thin, pointed object.
How to reset your Space Pro
To reset your Space Pro monitor:
Press and hold the reset button for approximately 5 seconds.
A countdown will appear on the Space Pro display, confirming the reset process.
How to view device information
By pressing the reset button briefly, you can cycle through the following information screens:
1. Battery level
2. SmartLink status
Displays the connection status with the Hub.
3. Wi-Fi IP and MAC addresses
Note: Because the Space Pro does not connect directly to Wifi, these addresses will be empty.
4. Serial number and ID
Note: the serial number and ID are also available on a label at the back of the monitor where the batteries are stored